CTM is a complete range of trolleys for the transport of precast elements; capacity 30, 50, 60 tons.
Trolleys are made in welded carpentry, fifth wheel to bear the load of to steered industrial type with lubricators; tow rudder with type approved towing eye mand suspension spring; front and rear trolleys with double axle; superelastic self-sealing pneumatics in full rubber, with 3 sectors with anti-abrasion treads, intermediate coat in elastic amortizing rubber, internal heel with high elastic mod with safety hook to the rim, external diameter ca. 690 or 790 mm, width ca. 235 cm, disk with plate base with lateral detachable rings, axle shafts (without brake) with studs in square bar.
• Code CTM50TB: couple of trolleys for transport with a total max. capacity of 50 tons, composed with anterior steered trolley with double nearer axle, superior fifth wheel to bear the load and superior traverse; frame for connection between the trolleys for the unladen tow of rear trolley; posterior fix trolley with double nearer axle complete with superior traverse (width 235 cm), to bear the load.
• Code CTM15+15 or CTM30+30: couple of trolleys with each one a max. capacity of 15 or 30 tons, composed with couple of frame in rugged welded carpentry and each one equipped with a structure in welded beams with 2 axes with single wheels; every trolleys (front and rear) is equipped with superior traverses bearing the loading floor on the fifth wheel capacity 15/30 tons with lubricators, steered axle on the fifth wheel with lubricators; fix posterior axle; Power Steering device (standard equipment in CTM30+30, option on require for CTM15+15) in the rear trolley controlled by a hydraulic pump unit, fed by a couple of batteries (truck type); installation in a protected box; hydraulic power group with tank, electrical motor, pump; board of electrical feeding in a protected box; control with push-button panel with 2 buttons and 5m feeding cable; automatic equipment to recharge the batteries; on request equipment to fix the precast to be applied with bolts and nuts on the bearing traverse.
• Code CTM50TT: trolley with max. total capacity of 50 tons, composed with: front steered trolley with double nearer axle; rudder for telescopic connection for the axle base of the trolleys, which can be regulated between ca. 8 m and ca. 12 m., realized in a box-type structure, welded with coupling pivots of the extractable elements. Total length of the equipment from 11 to 17 m; rear fix trolley with double nearer axle.
• Code CTM70P: specific equipment for the transport of prefabricated panels inside the plants, with max. Total capacity of 70 tons and load uniformly distributed on the expected support points with limit 6.000kg per wheel and max. speed 5km/hour, front steered trolley with industrial bearings fifth wheel, fix rear trolley with nearer double axle and oscillating with balancers on pivot with bearings. Code CTM100R: specific trolley for panels with electric motors and wheels on rails